PLA Marble

PLA Marble Filament

PLA Marble Filament combine a refined stone-like finish with PLA durability—ideal for décor, architectural models, display pieces, prototypes, and short-run production.

Impact Resistant

Eco-Conscious

Weather Resistant

Low Shrinkage

PLA Marble Filament Stone-Look Texture with PLA Durability

Create architectural models, sculptures, and décor with a natural speckled finish and the practical toughness of a PLA base.

Uniform Marble Speckling Across the Spool

Evenly distributed stone-like flecks help maintain a consistent marble appearance across decorative models and production batches.

Broad Compatibility for FDM Workflows

Designed for common FDM printer platforms, making stone-look PLA easier to adopt across studios and print farms.

Your browser does not support HTML5 video.

PARAMETER INFORMATION

PLA Marble

Aesthetic FDM Filament

PRINT SETTINGS
Pre-Print Drying (Filament Dryer)	50±5°C, 4-8h	Print & Storage Humidity	<20% RH (Sealed with desiccant)
Nozzle Temperature	190-230°C	Nozzle Diameter	0.4/0.6/0.8mm
Build Plate Type	Cool Plate SuperTack/Textured PEI Plate/Smooth PEI Plate	Build Plate Temperature	55-65°C
Cooling Fan	100%	Print Speed	50-200mm/s
Retraction Distance	0.6-1.0mm	Retraction Speed	20-40mm/s
Chamber Temperature	25-45°C	Max. Overhang Angle	55°
Max. Bridge Length	30mm	Build Plate Surface Treatment	No treatment required

MECHANICAL PROPERTIES

Tensile Strength / MPa	Elongation at Break / %	Flexural Modulus / MPa	Flexural Strength / MPa	Impact Strength / kJ/m2
33	6	2920	75	24

Recommended values may be fine-tuned for printer model, geometry, and ambient conditions.