PETG Basic

PETG Basic Filament

Reliable strength, smooth extrusion, and consistent results for prototypes, functional parts, and everyday production.

Reliable
Printing Strong &
Durable Smooth
Extrusion Neatly
Wound Wide
Compatibility

Smooth Corners, Less Finishing

Optimized flow creates clean transitions and smooth walls, reducing finishing work on prototypes and production parts.

Clean Detail at Changing Speeds

Refined surface detail stays consistent through speed changes, balancing quality and throughput.

High-Speed PETG, Higher Throughput

High-speed FDM performance shortens cycle times while maintaining a professional surface finish.

Your browser does not support HTML5 video.

PARAMETER INFORMATION

PETG Basic

General FDM Filament

PRINT SETTINGS
Pre-Print Drying (Filament Dryer)	60±5°C, 4-8h	Print & Storage Humidity	<20% RH (Sealed with desiccant)
Nozzle Temperature	230°C-260°C	Nozzle Diameter	0.2/0.4/0.6/0.8mm
Build Plate Type	Cool Plate SuperTack/Textured PEI Plate/Smooth PEI Plate	Build Plate Temperature	60-80°C
Cooling Fan	0-60%	Print Speed	50-200mm/s
Retraction Distance	0.4-0.8mm	Retraction Speed	30-60mm/s
Chamber Temperature	35-50°C	Max. Overhang Angle	70°
Max. Bridge Length	30mm	Build Plate Surface Treatment	No treatment required

MECHANICAL PROPERTIES

Tensile Strength / MPa	Elongation at Break / %	Flexural Modulus / MPa	Flexural Strength / MPa	Impact Strength / kJ/m2
51	9	1950	75	34

Recommended values may be fine-tuned for printer model, geometry, and ambient conditions.